Nexo PS10 10″ Speaker

Rental Quote Request

Contact Name *
Fill out this field
Contact Email *
Please enter a valid email address.
Contact Phone *
Fill out this field
Hire Start Date *
Fill out this field
Hire End Date *
Fill out this field
Message
Fill out this field
Are you a robot? What is 28 + 13 = ?
Enter the equation result to proceed

The PS10 Loudspeaker System is the foundation of Nexo’s acclaimed PS Series; versatile, compact, full-range loudspeakers tailored for a wide range of touring and installed sound reinforcement applications. Like all Nexo products, the PS10 Loudspeaker and optional LS500 Subwoofer are designed to work with advanced electronic processors, guaranteeing consistent performance and reliability of the highest standard.

The NEXO PS10 Loudspeaker can be safely driven with over 500 Watts of amplifier power, yet it is only half the weight and volume of standard trapezoidal systems.

The dispersion, architecture and weight balance of the PS10 Loudspeaker are designed to provide both exceptional PA and stage monitor performance from a single product without compromise. This flexibility is realized by a proprietary constant directivity asymmetrical dispersion horn, easily rotated in four positions by the user. Coupled with the horn’s unique progressive horizontal (50° to 100°) and vertical (55°) dispersion, the most suitable pattern can be selected for vertical or horizontal PA usage or wedge monitoring. The 2-way passive 8 Ohm design uses a single amplifier channel to deliver bi-amped performance for less money, space and complexity.

 

 

Data Sheet click here
Frequency response (–5 dB standard) 65 Hz – 20 kHz ±3dB (40 Hz – 20 kHz ±3dB with LS500 Subwoofer)
Usable Range @-6dB 58 Hz – 21 kHz (38 Hz – 21 kHz with LS500 Subwoofer)
Nominal Peak SPL @ 1m 124 to 127dB Peak (for 200 to 500 W RMS Amp.)
Configuration LF Components 1 x 10″ (25 cm) 8 Ohm driver
HF Components 1 x 1″ throat driver + Low Distortion, Constant Directivity Asymmetrical Dispersion Horn.
Nominal impedance 8 Ω
Power handling capacity (RMS/peak 10 ms) 200 to 500 Watts into 8 Ohms for 1 x PS10; 400 to 1000 Watts into 4 Ohms for 2 x PS10 per channel
Components
12″ driver
1.3″ exit compression driver with 3″ coil and rotatable CD horn
passive crossover network
Nominal dispersion angle (h x v)
50° to 100° Hor. x 55° Vert. Rotatable Horn, 4 positions
Connections
2 x NL4MP SPEAKON 4 pole
The PS10 is wired 2- & 2+ on Speakon connectors, LS500 on 1- & 1+. Loop through Speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS10 & 1 x LS500 in no particular order.
Power Passive
Dimensions WxHxD (unit) 515 x 316 x 277 mm
Dimensions WxHxD (dual road case) 690 x 410 x 750 Millimetres
Weight (unit) 16kgs
Weight (2 units + dual road case) 70kgs
No results found.