| Data Sheet |
click
here |
Power
Requirements |
12 V DC (10.8 V to 13.2 V) |
| Current consumption |
1.0
A (Connector Input) 0.6 A (PoE+ power supply) |
| Power Input Connector |
XLR 4-pin or
LAN cable PoE+ |
Controller
Supported Equipment |
IP/RS422, AW-UE150W/K, AW-HR140,
AW-HE130W/K, AW-HN130W/K, AW-UE70W/K, AW-UN70W/K, AW-HE40 Series,
AW-HN40HW/HK, AW-HE38HW/HK, AW-HN38HW/HK |
| Inputs |
3G-SDI IN SMPTE292 / 75 Ω (BNC x
1) |
| Supported formats |
1080/59.94p (Level-A support only), 1080/50p (Level-A support
only), 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF,
1080/25PsF |
| Outputs |
3G-SDI Active Through Output – SMPTE292 / 75 Ω (BNC x 1) |
| LAN |
100BASE-TX PoE+
input Connection cable: LAN cable, max. 100 m (328 ft) When connecting the
unit via a switching hub Straight cable or a cross cable (category 5 cable),
STP (Shielded Twisted Pair) cable recommended When connecting the unit
directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair)
cable recommended |
Serial
Control |
RS-422 (control signals for remote
cameras) |
Serial Control
Cable |
RJ-45 Connector Straight cable (category 5e or
better shielded cable), max. 1000 m (3280 ft) |
| Tally Connector |
D-sub 25-pin,
female, inch thread |
Tally
Out |
Open collector output (negative logic) Maximum
voltage resistance DC 24 V, Maximum current 50 mA |
| Tally In |
10 inputs (for receiving photocoupler
signals) |
GPIO
Connector |
D-sub 25-pin, female, inch thread |
| GPIO1 |
GPI : 6 inputs
(for receiving photocoupler signals) GPIO : 5 inputs (for receiving
photocoupler signals) or 5 outputs (open collector outputs, negative logic)
Input/output switched with menu settings |
| GPIO2 |
GPI : 10 inputs (for receiving photocoupler
signals) GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs
(open collector outputs, negative logic) Input/output switched with menu
settings |
| LCD Display |
7-inch Touch Panel GUI Monitor (WVGA (800×480) ) |
| SD Memory Card slot |
SDHC / SDXC Memory Card Slot x 1 |
| No. of Connectable Cameras |
200 (IP), 5
(RS422) |
No. of Camera Selection
Buttons |
10 |
| No. of Camera Groups |
20 (10 units per 1
group) |
| Preset Memory |
No. of memory : presets 100 |
| Tracing Memory |
No. of cameras : Cam1 to Cam10
Recording time, no. of memory settings : Maximum 5 min. total per camera,
maximum of 10 settings per camera |
| No. of User Assignable Buttons |
6 + up to 10 on
the LCD menu |
Pan / Tilt Speed
Adjustment |
7 levels |
| Tally LED display color |
Green / Red |
| PoE+ |
IEEE802.3at
standard: DC 42 V to 57 V (Camera Input) |
| Ambient Operating Temperature |
0 °C to 40 °C
(32 °F to 104 °F) |
Ambient
Operating Humidity |
20% to 90% (no
condensation) |
Storage
Temperature |
-20 °C to 50 °C (-4 °F to 122 °F) |
| Weight |
Approx. 3.2 kg
(7.05 lb) |
Dimensions (W x H x D)
(mm) |
342 mm x 178 mm x 245 mm(excluding
protrusions) |
