Data Sheet
|
click here |
| DVI-D Input/Output |
Digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical frequency: 60 Hz
Video format inputs:
Digital RGB: 1080/50p, 1080/59.94p
Vertical frequency: Same as system formats
Video format outputs:
Digital RGB: 1080/50p, 1080/59.94p, 1080/50i, 1080/59.94i, 720/50p, 720/59.94p
• The input and output of analog signals are not supported.
• Output support the high-resolution multi view mode:
Signals are output with a high resolution even when SD is set as the system mode.
(When high-resolution multi view mode has been enabled, MV is selected as the DVI-D OUT output, and it is not possible to select MV with SDI OUT.)
• This connector does not support the HDCP technologies.
Standard input/output: 1 line each (DVI-D IN, DVI-D OUT)
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft). |
| DVI-D Input (Option board) |
Digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical frequency: 60 Hz
Digital RGB: 1080/50p, 1080/59.94p
• Analog input signals are not supported.
• This connector does not support the HDCP technologies.
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M8 boards are used)
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft). |
| SDI Outputs |
HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)
5 signal lines, standard: OUT1 x 2; OUT2 to OUT5 x 1 each
9 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2 (When two AV-HS04M7 boards are used)
HD: SMPTE 292M (BTA S-004B) standard complied with
• Output level: 0.8 V [p-p]±10 %
• Rise time: HD: Less than 270 ps
• Fall time: HD: Less than 270 ps
• Difference between rise time and fall time: HD: Less than 100 ps
• Alignment jitter: HD: Less than 0.2 UI (130 ps)
• Timing jitter: HD: Less than 1.0 UI
• Eye aperture ratio: More than 90 %
• DC offset: 0 ±0.5 V |
| SDI Inputs |
HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)
8 signal lines, standard: IN1 to IN8
12 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M1 boards are used; with active through)
HD: SMPTE 292M (BTA S-004B) standard complied with
• 0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer More than 100 m (328 ft) (when 1.5 Gbps/5C-FB cable is used)
SD: SMPTE 259M standard complied with
• 0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer 200 m (656 ft) (when 5C-2V cable is used) |
| Video Outputs (10 signal lines, maximum) |
Standard SDI: 5 signal lines BNC x 6 (SDI OUTPUT 1 to SDI OUTPUT 5 x 1 line each,
2 distributed outputs for SDI OUTPUT 1 only)
Standard DVI-D: 1 signal line DVI-D x 1
Optional: Up to 4 additional lines (OUT A1, OUT A2, OUT B1, OUT B2) (Up to two option boards can be installed in the two input/output slots.)
• PGM, PVW, AUX1 to AUX4, MV (MULTI_VIEW), CLN, KEYOUT and MEM PVW can be assigned to SDI OUTPUT 1 to SDI OUTPUT 5, DVI-D, OUT, OUT A1, OUT A2, OUT B1 and OUT B2.
• CLN can be pre-selected from KEY or DSK using a menu. |
| Signal Formats |
SD: 480/59.94i, 576/50i
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF*, 1080/23.98PsF*
*The following option boards are not supported:
AV-HS04M1, AV-HS04M2, AV-HS04M3, AV-HS04M4, AV-HS04M5,AV-HS04M6, AV-HS04M7 |
| Video Inputs (13 signal lines, maximum) |
Standard SDI: 8 signal lines BNC x 8 (SDI INPUT 1 to SDI INPUT 8)
• The up-converter function can be used for the SDI INPUT 5 to SDI INPUT 8 connectors.
Standard DVI-D: 1 signal line DVI-D x 1
Optional: Up to 4 additional signal lines (IN A1, IN A2, IN B1, IN B2) (Up to two option boards can be installed in the two input/output slots.) |
|
|
