Jands E-200 Ezicom Talkback Master

Rental Quote Request

Contact Name *
Fill out this field
Contact Email *
Please enter a valid email address.
Contact Phone *
Fill out this field
Hire Start Date *
Fill out this field
Hire End Date *
Fill out this field
Message
Fill out this field
Are you a robot? What is 27 + 3 = ?
Enter the equation result to proceed

The Jands Ezicom E-200 headset intercom master station is designed to meet communication needs in contemporary stage productions, particularly where high ambient noise levels may be experienced. A basic system would consist of one E-200 master station connected to a number of remote E-100 or E-300 substations.

Features

  • Up to 20 remote E-100 or seven wall-mounting E-300 substations can be connected to one E-200 master station
  • Up to 100 remote substations may be run in a system which uses multiple master stations to supply power * Connection between the master station and the substations is via standard two-core screened microphone cable
  • Audio levels remain constant when stations join or leave the line
  • Cable lengths of up to a kilometre may be used without any problems
  • Audio circuits are designed to give high intelligibility even in the presence of dimmer noise and strong RF fields
  • Two “ring” (channels) operation
  • Select and terminate push switches for each channel
  • Headset connector on front panel
  • Headset level control
  • Master “Call” red illuminated push switch
  • Microphone “On/Off” switch with green LED
  • Master terminate switch on back panel
  • Power “On” green LED for supply rail
  • Channel “On” green LED for each channel
  • Channel “Call” red LED for each channel
Data Sheet click here
Power supply: 240(±10%)V AC, 50/60Hz
Consumption: 40VA max.
Connector: IEC 3-pin with integral fuse
Fuse: 2A M205
Signal to noise ratio: >80dB
Microphone impedance: 50~600Ω nominal
Headset impedance: 8~2000Ω nominal
Headset power: 200mW @1k Hz, 0.1%THD (8Ω load) 1300mW @1k Hz, 0.1%THD (200Ω load) 450mW @1k Hz, 0.1%THD (600Ω load)
Headset connector: 13Cannon 4-pin AXR connector
Dimensions: 482mm (W)344mm(1RU)(H)3150mm (D)
Net/shipping weight: 3.1/4.5kg
No results found.