Jands E-400 Ezicom Talkback Master

Rental Quote Request

Contact Name *
Fill out this field
Contact Email *
Please enter a valid email address.
Contact Phone *
Fill out this field
Hire Start Date *
Fill out this field
Hire End Date *
Fill out this field
Message
Fill out this field
Are you a robot? What is 21 - 10 = ?
Enter the equation result to proceed

The Jands Ezicom E-200 headset intercom master station is designed to meet communication needs in contemporary stage productions, particularly where high ambient noise levels may be experienced. A basic system would consist of one E-200 master station connected to a number of remote E-100 or E-300 substations.

Features

  •  Up to 20 remote E-100 or seven wall-mounting E-300 substations can be connected to one E-400 master station
  •  Up to 100 remote substations may be run in a system which uses multiple master stations to supply power
  •  Connection between the master station and the substations is via standard two-core screened microphone cable
  •  Audio levels remain constant when stations join or leave the line
  •  Cable lengths of up to a kilometre may be used without any problems
  •  Audio circuits are designed to give high intelligibility even in the presence of dimmer noise and strong RF fields
  •  Four “ring” (channels) operation
  •  Select and terminate switches for each channel
  •  Headset connector on front and back panel
  •  Headset level control
  •  Master “Call” red illuminated push switch
  •  Microphone “On/Off” switch with green LED
  •  Buzzer “On/Off” switch
  •  Programme input connector/level control
  •  Programme input mic/line switch available
  •  Master terminate switch on back panel
  •  Power “On” green LED for supply rail and desk lamp
  •  Channel “On” green LED for each channel
  •  Channel “Call” red LED for each channel
Data Sheet click here
Power supply: 240(±10%)V AC, 50/60Hz
Consumption: 50VA max
Connector: IEC 3-pin with integral fuse
Fuse: 2A M205
Signal to noise ratio: >80dB
Microphone
impedance: 50~600W nominal
Headset
impedance: 8~2000W nominal
Headset power: 200mW @1k Hz, 0.1%THD (8W load)  1300mW @1k Hz, 0.1%THD (200W  load)  450mW @1k Hz, 0.1%THD (600W load)
Headset
connector(s): 23Cannon 4-pin AXR connector
Dimensions: 482mm (W)344mm(1RU)(H)3150mm (D)
Net/shipping weight: 3.1/4.5kg
No results found.