Clear-Com RS-601 Single Channel Talkback Beltpack

Rental Quote Request

Contact Name *
Fill out this field
Contact Email *
Please enter a valid email address.
Contact Phone *
Fill out this field
Hire Start Date *
Fill out this field
Hire End Date *
Fill out this field
Message
Fill out this field
Are you a robot? What is 23 - 14 = ?
Enter the equation result to proceed

Clear-Com designed the 600 series of beltpacks to meet the needs of all beltpack users, from beginners to experienced professionals. For advanced users, the 600 series provides the most advanced level of functioning available.

The RS-601 offers all the performance and durability of Clear-Com’s world-standard beltpacks, plus TW compatibility. You can use the RS-601 on a TW line (Audio on Channel B) without loading down Channel A.

Data Sheet click here
Amplifier Design: I.C. amplifiers, including solid-state digital switching and signaling circuits. Current-limited and shortcircuit protected.
Signal to Noise: >75 dB
Bridging Impedance: >15k
Line Level: -14 dB, +5 dB max.
Sidetone Adjust: >35 dB
EMI and RFI rejection: >60 dB
Microphone Pre-Amplifier
Headset Mic Impedance: 200 ohms
Gain, mic to line: 41 dB (dynamic)
Limiter Range: 26 dB
Frequency Response: 200 Hz – 12 kHz contoured for intelligibility
Headphone Amplifier
Load Impedance: 50 – 2,000 ohms
Output Level: +17 dBv before clipping
Distortion: <0.1% THD @ 1 kHz
Gain, line to output: +34 dB
Frequency Response: 100 Hz – 18 kHz, ±2dB
Connectors
Intercom Line: (2) 3-pin XLR–M–F
Headset: 4-pin XLR–M
Power Requirements
RS-601 26mA quiescent

30mA average talk

50mA talk with signaling

DC Voltage Range: 12-32 volts
Environmental
Operating Temp. Range: 0°C – 70°C (32°F – 158° F)
Humidity: 0 – 90% relative humidity
Dimensions 4.58″H x 3.73″W x 1.34″D (116 x 95 x 34 mm)
Weight 7.3 oz. (0.20 kg)
No results found.