d&b V8 Line Array Loudspeaker

Rental Quote Request

Contact Name *
Fill out this field
Contact Email *
Please enter a valid email address.
Contact Phone *
Fill out this field
Hire Start Date *
Fill out this field
Hire End Date *
Fill out this field
Message
Fill out this field
Are you a robot? What is 24 + 10 = ?
Enter the equation result to proceed

The d&b Audiotechnik V Series V8 is a 3-way passive design housing 2 x 10″ LF drivers, one hornloaded 8″ MF driver and two 1.4″ exit HF compression drivers with 2.5″ voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 80° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz.

The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V8 loudspeakers or combined with V12s and / or with V-SUBs.

The V8 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.

Data Sheet
click here
Frequency response (–5 dB standard) 67 Hz – 18 kHz
Frequency response (–5 dB CUT mode) 100 Hz – 18 kHz
Max. sound pressure (1m, free field) with D6/10D N/A
Max. sound pressure (1m, free field) with D20/30D 139 dB
Max. sound pressure (1m, free field) with D80 142 dB
Cabinets per amplifier channel 2
Configuration High performance 3-way passive line array loudspeaker
Nominal impedance 8 Ω
Power handling capacity (RMS/peak 10 ms) 500/2000 W
Components
2 x 10″ driver / 1 x 8″ driver
2 x 1.4″ exit compression driver
passive crossover network
Nominal dispersion angle (h x v)
80° 13
Connections
2 x EP5
Power
Passive
Dimensions WxHxD (unit) 310 x 700 x 460 mm
Dimensions WxHxD (dual road case) N/A
Weight (unit) 34kgs
Weight (2 units + dual road case) 109kgs
No results found.