The d&b Audiotechnik E4 is a lightweight 2-way passive loudspeaker using a neodymium LF driver and a coaxially mounted wide dispersion dome tweeter. It offers a wide symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. The E4 is intended for mobile near field applications for speech and music reinforcement in theatres, conferences, industrial presentations, broadcast studios and as surround sound, delay and fill systems. It can be used stand-alone or supplemented by different subwoofers from the E-Series. The highly compact sealed enclosure is injection moulded with an impact resistant black paint finish. The loudspeaker cabinet is weather protected and suitable for outdoor use as standard. The d&b D20 and D6 amplifiers are recommended to drive the E4. The d&b D80 can also be used. All of the above amplifiers are available to hire from AVE.
d&b E4 4″ Loudspeaker
Data Sheet |
click here |
Frequency response (–5 dB standard) | 120 Hz – 18 kHz |
Frequency response (–5 dB CUT mode) | 180 Hz – 18 kHz |
Max. sound pressure (1m, free field) with D6/10D | 114 dB |
Max. sound pressure (1m, free field) with D20/30D | 115 dB |
Max. sound pressure (1m, free field) with D80 | 115 dB |
Cabinets per amplifier channel | 4 |
Configuration | 2-way compact coaxial loudspeaker |
Nominal impedance | 16 Ω |
Power handling capacity (RMS/peak 10 ms) | 60/400 W |
Components |
4″ driver with neodymium magnet
0.75″ dome tweeter coaxially mounted passive crossover network |
Nominal dispersion angle (h x v) |
100° conical
|
Connections |
2 x NL4
two pole push terminal
|
Power |
Passive |
Dimensions WxHxD (unit) | 150 x 120 x 106 mm |
Dimensions WxHxD (4 per road case) | 460 x 350 x 180 mm |
Weight (unit) | 1.1kgs |
Weight (2 units + dual road case) | 9.8kgs |