d&b V-SUB 18″ Subwoofer

Rental Quote Request

Contact Name *
Fill out this field
Contact Email *
Please enter a valid email address.
Contact Phone *
Fill out this field
Hire Start Date *
Fill out this field
Hire End Date *
Fill out this field
Message
Fill out this field
Are you a robot? What is 28 + 10 = ?
Enter the equation result to proceed

The d&b Audiotechnik V Series V-SUB is an actively driven high performance cardioid subwoofer powered by a single amplifier channel.

The V-SUB features integrated rigging equipment, and shares the same acoustical and visual design as the V-GSUB, which is intended for ground stacked applications only. It houses two long excursion neodymium drivers, an 18″ driver in a bass-reflex design facing to the front and a 12″ driver in a two chamber bandpass design radiating to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system that reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction.

The V subwoofer can be used to supplement V8 and V12 loudspeakers in various combinations, ground stacked or flown, either integrated on top of a V8 / V12 array or as a separate column.

The V-SUB cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates two handles, whilst the top panel has an M20 high stand flange inserted.

Data Sheet
click here
Frequency response (–5 dB standard) 37 Hz – 115 Hz
Frequency response (–5 dB CUT mode)
Max. sound pressure (1m, free field) with D6/10D N/A
Max. sound pressure (1m, free field) with D20/30D 133 dB
Max. sound pressure (1m, free field) with D80 137 dB
Cabinets per amplifier channel 2
Configuration High performance flyable cardioid subwoofer
Nominal impedance 8 Ω
Power handling capacity (RMS/peak 10 ms) 800/3200 W
Components
18′” Driver/12″ Driver
Nominal dispersion angle (h x v)
Connections
2 x EP5
Power
Passive
Dimensions WxHxD (unit) 606 x 700 x 728 / 830 mm
Dimensions WxHxD (dual road case) N/A
Weight (unit) 64kgs
Weight (2 units + dual road case) N/A
No results found.